HAVOC roof crossbars for Tesla Model 3 2017β2026 β for factory roof mounting points
- SKU: 20-0105
- In stock
-
5,200.00 Π³ΡΠ½
Specifications
| Catalogue specifications | |
| Brand | HAVOC |
| Compatibility | Tesla Model 3 2017β2026 |
| Material | Aluminium and steel |
| Product type | Roof carrying systems |
| SKU | 20-0105 |
More for Tesla Model 3
Product overview
- Vehicle
- Tesla Model 3 2017β2026
HAVOC aerodynamic crossbars for Tesla Model 3 (2017-2026)
A premium roof rack system designed specifically for Tesla Model 3, including the updated version Highland. The aerodynamic profile keeps the cabin quiet even at 100 km/h+ and has minimal impact on driving range.
Key benefits:
- Quality backed by US certification.
- Fits the original mounting points beneath the glass roof without damaging the vehicle.
- Materials: aircraft-grade aluminium and hardened steel.
Β
Β
System contents
| β | Component | Purpose |
|---|---|---|
| 1 | Trim tool | Preparing the mounting points beneath the seal |
| 2 | Hex key | Tightening the mounting nuts |
| 3 | Tape measure | Precisely aligning the crossbars on the roof |
| 4-5 | Roof crossbars for (Front/Rear) | Main (longer) and rear (shorter) bars |
| 6-9 | Rubber supports | Cushioning and glass protection beneath the mounting feet |
| 10 | Rubber strips | Seal kit |
| 11-12 | Mounting | Nuts and metal brackets for the original mounting points |
| 13-16 | Protective film | Protecting the glass panel against scratches |
| 17-18 | Covers | Decorative aerodynamic covers for the mounting feet |
βοΈ Weight limits and load capacity
Although roof tents are rarely fitted to a Tesla, it is important to understand the panoramic roof's load limit:
| Load type | Recommended weight | What this means |
|---|---|---|
| Dynamic (while driving) | up to 70 kg | Maximum cargo weight, including a roof box or bicycles, that can be safely carried while driving. |
β οΈ Important points to remember:
Centre of gravity: Any roof load raises the vehicle's centre of gravity. The Tesla's battery keeps its centre of gravity low, but a roof box changes how the vehicle behaves during sudden manoeuvres at high speed.
Step-by-step fitting instructions
| Stage | Action | Important detail |
|---|---|---|
| 1. Preparation | Clean the roof and apply the protective film (13-16) at the marked positions | Follow the arrows on the roof glass |
| 2. Brackets | Hook the brackets (12) onto the attachment points beneath the seal | Use the trim tool (1) to lift the rubber seal |
| 3. Supports | Fit the rubber pads (6-9) onto the brackets | Check the markings (Front/Rear, L/R) |
| 4. Fitting | Place the crossbars (4, 5) over the threaded studs | Remember: the front bar is longer than the rear bar |
| 5. Securing | Tighten the nuts (11) with the tool (2) until resistance is felt | Do not overtighten: the safety of the glass depends on it! |
| 6. Finishing | Lock the locks (10) and secure the decorative covers | The covers should click into place |
By choosing HAVOC, you get a product that has passed a multi-stage US quality control system. We supply all the necessary fitting hardware to make installation on your Tesla as straightforward and reliable as possible.
Customer reviews
Share your experience
Your experience helps others choose.